Maker Select Silicone PVC Plugs, PVC Pipe

• How to determine resin needed for a rectangle or square mold (this is a good place to start, you should verify during pour and make adjustments in future) There is .554oz in 1 cubic inch of resin
• liquid volume = ( length x width x height ) x .554
• example- if your mold is 6" x 5.5" x 1" = 33 cubic inches take 33 cubic inches x .554 ox per cubic inch = 18.28 oz

• For Alumilite or Epoxy
• Available in a range of sizes.
• Silicone plugs
• Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
• Designed with center marker in plug to indent on your cast showing dead center
• Removable plugs make for easy de-molding
• Made in USA

• Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
• PVC pipe is Schedule 40 Clear Schedule 40 PVC
• For Alumilite or Epoxy
• Available in a range of sizes.
• Removable plugs make for easy de-molding
• PVC 4" & 3" diameter measures approximately 6" Long
• PVC 3/4" and 1.5" diameter measures approximately 7" long

• Use plenty of mold release
• First use the cast will be tight and may require strong tapping to remove
• Gets easier to de-mold with each cast
• Plugs have been designed to have a center marker to indicate on your cast where dead center is

Instructions Page

• Ballpoint Pen/Pencil Kits
• Rollerball/Fountain Pen Kits
• Project Kits
• Machinery, Tools & Chucks
• Resin Sheets, SDS, Data Sheets & Misc
• Quick Reference Guides