Skip to product information
1 of 5

Maker Select HDPE Block Mold

Maker Select HDPE Block Mold

Product Specs

  • For Alumilite or Epoxy
  • Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
  • Standard mold measures approximately 6" x 5.5" x 1"
  • Deep mold measures approximately 6" x 5.25" x 1.5"
  • Removable plugs make for easy de-molding, especially when used in conjunction with the de-mold rack
  • First time use demolding tip: If the blanks don't come out easily with air or a tap try whacking the mold upside down on the table. This creates some air behind the blanks and they should pop out more easily.

How to calculate volume

  • How to determine resin needed for a rectangle or square mold (this is a good place to start, you should verify during pour and make adjustments in future) There is .554oz in 1 cubic inch of resin
  • liquid volume = ( length x width x height ) x .554
  • example- if your mold is 6" x 5.5" x 1" = 33 cubic inches take 33 cubic inches x .554 ox per cubic inch = 18.28 oz
Regular price $55.99 USD
Regular price Sale price $55.99 USD
Sale Sold Out

Crafted by skilled makers with quality in mind, the Maker Select HDPE Block Mold is proudly made in the USA. Its durable HDPE material ensures long-lasting use for all your molding needs.

View full details

Maker Select

Designed and made right here in Arizona, USA
Innovative design by Makers, Turners and Casters with years of experience.
Quality materials & well planned products.