1
/
of
3
Ring Blank Casting Mold - Maker Select HDPE Ring Mold
Ring Blank Casting Mold - Maker Select HDPE Ring Mold
Product Specs
Product Specs
- For Alumilite or Epoxy
- Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
- Measures approximately - 6.25" x 5.25" x 1.5"
- 9 ring cavities each measures approximately - 1.5" diameter x .75" deep
- Removable plugs make for easy de-molding, especially when used in conjunction with the de-mold rack
- First time use demolding tip: If the blanks don't come out easily with air or a tap try whacking the mold upside down on the table. This creates some air behind the blanks and they should pop out more easily.
- Made in USA
How to calculate volume
How to calculate volume
- How to determine resin needed for a rectangle or square mold (this is a good place to start, you should verify during pour and make adjustments in future) There is .554oz in 1 cubic inch of resin
- liquid volume = ( length x width x height ) x .554
- example- if your mold is 6" x 5.5" x 1" = 33 cubic inches take 33 cubic inches x .554 ox per cubic inch = 18.28 oz
Pairs well with
Regular price
$53.99 USD
Regular price
Sale price
$53.99 USD
Unit price
/
per
Couldn't load pickup availability
Share




Maker Select
Designed and made right here in Arizona, USA
Innovative design by Makers, Turners and Casters with years of experience.
Quality materials & well planned products.