Record Power offers an amazing variety of sets of jaws to grip just about anything you could fit on their SC3 & SC4 Chucks or your SC2 & SC1 chucks. The Record Power jaws offer the ability to rough turn a bowl, re-chuck a bowl to finish turn the outside, turn a box, drill a pen blank and many other operations.
Fully compatible with Nova and Sorby Patriot chucks.
- 62313 - 50 mm standard jaws (approximately 2")
Featuring a specialised dovetail profile in expansion and the superb grip of the hawk beak design on contraction, these versatile jaws are a great all-round set, capable of bowl work to a good size and also spigot turning. They are supplied as standard with the SC3 and SC4 chucks.
Expansion: 52 - 72 mm
Contraction Spigot: 42 - 61 mm
Contraction Square: 30 - 51 mm
- 62317- 130mm dovetail jaws (approximately 5.12"
Featuring a specialised dovetail profile, these jaws are ideal for turning up to 30” bowls. They also feature a reverse dovetail for a contracting grip on large spigots.
Expansion: 125 - 145 mm
Contraction Spigot: 104 - 123 mm
Contraction Square: 74 - 94 mm
- 62321- 35m standard jaws (approximately 1.38")
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection.
Expansion: 38 - 58 mm
Contraction Spigot: 28 - 47 mm
Contraction Square: 16 - 37 mm
- 62322 - 75mm heavy jaws (approximately 2.95")
These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The internal gripper can also be used on smaller rough green timber. Also featuring an external dovetail in expansion, they can be used for large platters. A truly versatile and solid jaw set.
Expansion: 81 - 102 mm
Contraction Spigot: 46 - 65 mm
Contraction Square: 33 - 54 mm
- 62323 - long nose jaws
These extremely flexible jaws feature internal and external dovetails for bowl work. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck, allowing good tool access to the base of the timber for cleaning and shaping.
Expansion: 54 - 74 mm
Contraction Spigot: 38 - 58 mm
Contraction Square: 27.5 - 48 mm
- 62327 - Pin Jaws w/9mm bore (approximately .35")
Our new pin jaws have been improved by squaring the external shoulder to allow workpieces to properly register against the back of the jaws. This is ideal for use in expansion, to grip tubes in work pieces such as pepper or salt grinders. We have also reduced the internal diameter to 9 mm, making it ideal for making finials or lace bobbins - Thereby increasing its versatility. This set is ideal for miniature turning and to grip workpieces internally without excessive damage or marking.
Expansion: 28 - 45 mm
Contraction Spigot: 9 - 28 mm
Contraction Square: 7 - 27 mm
- 62329 - 100 mm dovetail deep gripper jaws (approximately 3.93")
Featuring a specialized dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal for large spigots of large hollow vessels.
Expansion: 94 - 114 mm
Contraction Spigot: 76 - 95 mm
Contraction Square: 54 - 74 mm
- 62336 - Mini spigot jaws w/13 mm bore (approximately .51")
To complement the new pin jaws, the mini spigot jaws have also been improved. These jaws perform many of the same tasks in expansion and the extra screw hole profiles and added teeth to the outside provide tremendous grip for when this area will not be visible in the finished work piece. This set has been given a 13 mm internal diameter, making it ideal for turning strong spigots on knobs and handles, again adding to their versatility.
Expansion: 26 - 46 mm
Contraction Spigot: 13 - 33 mm
Contraction Square: 11 - 31 mm
- 62337 - Pen Jaws
These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access.
Contraction Square: 10 - 26 mm
Contraction Spigot: 11 - 20 mm
- 62356 - Remounting Jaws mini - up to 200 mm (approximately 7.87")
Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work.
Expansion: 95 - 215 mm
Contraction Spigot: 59 - 170 mm
Contraction Square: 53 - 154 mm
- 62377 - Remounting Jaws mega
In response to many requests, we have increased the capacity of our larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of holding 275 mm (10 3/4”) diameter bowls in contraction mode. Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke set-ups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work.
- 62378 - Plastic Soft Jaws
These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece.
Diameter: 118 - 140 mm
Depth: 26 mm
- 62572 - 50 mm face plate ring (approximately 1.96")
- 62572 - 100 mm face plate ring (approximately 3.93")
SC1 & SC2 Jaws:
- 62301- Dome Jaws
These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface.
Contraction Spigot: 4.5 - 13 mm
Contraction Square: 4 - 11.5 mm
Contraction Spigot: 4.5 - 24 mm
Contraction Square: 4 - 25.5 mm
- 62302 - Pin Jaws
Another of the most popular jaws for full size chucks – these are also ideal for smaller chuck projects too. We have set the range of these bodies to be compatible with most tea light holder designs (on either body) as well as many salt or pepper pot designs and these offer an excellent expansion grip for many projects. The end of the jaw is dovetailed so can be used on its own as a delicate grip – or the jaw can be inserted full length using the back jaw face as a register and providing wall support to prevent the workpiece being knocked from a dovetail only grip. The dovetail at the end provides additional security in expansion mode.
Expansion: 39 - 47.5 mm
Contraction Spigot: 6 - 14.5 mm
Contraction Square: 4.5 - 12 mm
Expansion: 40 - 58 mm
Contraction Spigot: 6 - 26 mm
Contraction Square: 4.5 - 25 mm
- 62305 - Pen Jaws
These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects, as in addition to their strong grip, the work piece is moved forward from the chuck to allow greater access.
Contraction Spigot: 14 - 20 mm
Contraction Square: 14 - 24.5 mm
Contraction Spigot: 14 - 25 mm
Contraction Square: 14 - 30 mm
- 62303 - 40mm Standard Jaws
Featuring a specialized dovetail profile in expansion and the superb grip of the hawk beak design on contraction, these versatile jaws are a great all-round set, ideal for small bowl work and also spigot turning. They are supplied as standard with the SC1 and SC2 chucks.
Expansion: 40 - 50 mm
Contraction Spigot: 30 - 40 mm
Contraction Square: 24 - 34.5 mm
Expansion: 39 - 61 mm
Contraction Spigot: 28 - 51 mm
Contraction Square: 21 - 46.5 mm
- 62571 - 68mm Faceplate Ring
This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 40 mm jaw set which comes with both the SC1 and SC2 Mini Chucks.