Maker Select HDPE Block Mold
Maker Select HDPE Block Mold
Couldn't load pickup availability
Favorite Accessories
Maker Select HDPE Block Mold
For Alumilite or Epoxy
Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
Standard mold measures approximately 6" x 5.5" x 1"
Deep mold measures approximately 6" x 5.25" x 1.5"
How to determine resin needed for a rectangle or square mold (this is a good place to start, you should verify during pour and make adjustments in future) There is .554oz in 1 cubic inch of resin
liquid volume = ( length x width x height ) x .554
example- if your mold is 6" x 5.5" x 1" = 33 cubic inches
take 33 cubic inches x .554 ox per cubic inch = 18.28 oz
Removable plugs make for easy de-molding, especially when used in conjunction with the de-mold rack
First time use demolding tip: If the blanks don't come out easily with air or a tap try whacking the mold upside down on the table. This creates some air behind the blanks and they should pop out more easily.
*Made in USA*
Share




