Skip to product information
1 of 6

Maker Select HDPE Knife Scales Molds

Maker Select HDPE Knife Scales Molds

Product Specs

  • For Alumilite or Epoxy
  • Mold release 100% required for Epoxy Resins or you will stick the cast in the mold.
  • Plate measures approximately 5.5" x 4" x 1/2"
  • Pair measures approximately 5.5" x 2" x 1/2" per cavity
  • 2 Pocket 1" Deep measures approximately 5.5" x 2" x 1" per cavity
  • Removable plugs make for easy de-molding, especially when used in conjunction with the de-mold rack
  • First time use demolding tip: If the blanks don't come out easily with air or a tap try whacking the mold upside down on the table. This creates some air behind the blanks and they should pop out more easily.

How to calculate volume

  • How to determine resin needed for a rectangle or square mold (this is a good place to start, you should verify during pour and make adjustments in future) There is .554oz in 1 cubic inch of resin
  • liquid volume = ( length x width x height ) x .554
  • example- if your mold is 6" x 5.5" x 1" = 33 cubic inches take 33 cubic inches x .554 ox per cubic inch = 18.28 oz
Size
Regular price $49.99 USD
Regular price Sale price $49.99 USD
Sale Sold Out

 


View full details

Maker Select

Designed and made right here in Arizona, USA
Innovative design by Makers, Turners and Casters with years of experience.
Quality materials & well planned products.